FUNKE (LCD) BUNDLE
Combining the ART833-II Transceiver and ZTRT800H TransponderATR833-II LCD TRANSCEIVER
The new ATR833-II LCD has been derived from the ATR833 LCD transceiver with a largely digitised signal and audio processing and is therefore less sensitive to aircraft-side faults.
The built-in vox controlled intercom operates up to 4 microphones (2 standard, 2 dynamic). In many cases no extra intercom is required. This saves cost and weight. Headsets are separately adjustable. Using similar headsets a 4-place intercom can be built-up.
In addition to the standard functions there are 2 memories available. All frequencies of European airfields are preprogrammed and can be easily updated. More, the user can define up to 100 named frequencies to build up an own database. All stored frequencies can be searched by name.
- 760/2280 channel VHF Transceiver
- Easy operation with 4 line LCD display
- Built-in VOX intercom
- Supports Standard or dynamic microphones
- 100 quick-select frequency memories
- Full 6W carrier output
- 25KHz/8.33KHz channel spacing
- European frequency database
- Compact size - fits into 2.25" (57mm) instrument hole
- Weighs only 700g
- Auto TX cut-out after 2 minutes
- 14v operation
- Dual channel monitoring
ZTRT 800H LCD TRANSPONDER
- Frequency range: 118.000MHz .... 136.975 MHz
- Channel Spacing: 8.33 kHz
- HF output power: approx 6W
- NF output power: approx 4W
- Dimensions: 57mm hole in panel; length 178mm (without connector)
- Weight: approx 700 g
- Power consumption: approx 120mA standby; 1.8A during transmission
- Power Supply: 10.5V – 14V
- Supplied with connector
The ZTRT 800H LCD is a new development of the well known TRT 800 series transponder that can be seen easily from almost any angle. As with the earlier models the alticoder is built in and installation is straightforward.
It fits a standard 57mm aviation housing and measures approx 65 x 65 x 170 mm and produces 125 watts at the antenna.
EASA approval number is: EASA.21O.045 and a Form 1 and A/C address connector is part of the standard delivery.
If the optional TRT 800EMSS address adapter is fitted the RS 232 interface allows connection to a GPS receiver to support ADS-B Out functionality (Broadcasting of own position for processing by other aircraft for collision avoidance.)FEATURES
- Class 1 Level 2es
- Integral Alticoder (25ft increments)
- Pre-wired connector included
- EASA Approval number EASA.21O.045
- ADS-B ready
The UK's Independent Review Site
Good as always!
I received good and helpful advice about my prospective purchase and there was no attempt to rush me into a decision to purchhase
All products I have bought from Mendelssohns have been of high quality and well up to my expectations.
May I reiterate my thanks to you for your friendly and very prompt attention to my order.
Mrs. B (Scarborough, N York's)
To calculate your shipping click here >>
Orders will continue to be shipped normally until Friday 22nd December.
Products ordered between 23rd December 2017 and 3rd January 2018 will be sent out on 3rd January 2018
Free UK Mainland delivery on orders over £150.00 inc VAT
£5.40 inc VAT (up to 500g Royal Mail 1st Class recorded post)
£7.20 inc VAT/20Kg (ParcelForce 2 working days)
£12.00 inc VAT/20Kg (ParcelForce next working day).
Delivery prices will be calculated and displayed at checkout
Some products entail special delivery costs (e.g. Hazardous goods)
We are an EASA part 145 approved organisation. Our policy is to sell only high quality products which offer good value for money. If you are not completely satisfied with your purchase please return the goods in original condition and packaging within 28 days of purchase for replacement, exchange, or a full no quibble refund.