FUNKE (OLED) BUNDLE
Combining the ATR833-II OLED Transceiver and ZTRT800H OLED TransponderFUNKE ATR833-II OLED
New model with a largely digitised signal and audio processing and is therefore less sensitive to aircraft-side faults.
A complete solution for radios in small aircraft with the new channel separation of 8.33 kHz. The channel spacing can be switched between 25kHz and 8,33kHz.
The built-in vox controlled intercom operates up to 4 microphones (2 standard, 2 dynamic). In many cases no extra intercom is required. This saves cost and weight. All headsets are separately adjustable. Using similar headsets a 4-place intercom can be built-up.
In addition to the standard functions there are 2 memories available. All frequencies of European airfields are pre-programmed and can be easily updated. More the user can define up to 100 named frequencies to build up an own database. All stored frequencies can be searched by name.
- 760/2280 channel VHF Transceiver
- Easy operation with 4 line OLED display
- Built-in VOX intercom
- Supports Standard or dynamic microphones
- 100 quick-select frequency memories
- Full 6W carrier output
- 25KHz/8.33KHz channel spacing
- European frequency database
- Compact size - fits into 2.25" (57mm) instrument hole
- Weighs only 700g
- Auto TX cut-out after 2 minutes
- 14v operation
- Dual channel monitoring
ZTRT 800H OLED
- Frequency range: 118.000MHz .... 136.975 MHz
- Channel Spacing: 8.33 kHz
- HF output power: approx 6W
- NF output power: approx 4W
- Dimensions: 57mm hole in panel; length 178mm (without connector)
- Weight: approx 700 g
- Power consumption: approx 120mA standby; 1.8A during transmission
- Power Supply: 10.5V – 14V
- Supplied with connector
A development of the well known TRT 800 series transponder that can be seen easily from almost any angle. As with the earlier models the alticoder is built in and installation is straightforward.
It fits a standard 57mm aviation housing and measures approx 65 x 65 x 170 mm and produces 125 watts at the antenna.
A Form 1 and A/C address connector is part of the standard delivery.
If the optional ZTRT 800EMSS address adapter is fitted the RS 232 interface allows connection to a GPS receiver to support ADS-B Out functionality (Broadcasting of own position for processing by other aircraft for collision avoidance.)FEATURES
- Class 1 Level 2es
- Integral Alticoder (25ft increments)
- Pre-wired connector included
- ADS-B ready
The UK's Independent Review Site
Good range of products - from high end Avionics to low end consumables and accessories
Good as always!
I received good and helpful advice about my prospective purchase and there was no attempt to rush me into a decision to purchhase
I just want to thank you all again, and especially you Anne for your help in tracking the package.
It is wonderful to work with people like you, for whom it is of no consequence whether one buys a simple cable or an expensive GPS. Your effort is the same in all cases.
Keep up this way of doing business, it is refreshing.
To calculate your shipping click here >>
Free UK Mainland delivery on orders over £150.00 inc VAT
£5.40 inc VAT (up to 500g Royal Mail 1st Class recorded post)
£7.20 inc VAT/20Kg (ParcelForce 2 working days)
£12.00 inc VAT/20Kg (ParcelForce next working day).
Delivery prices will be calculated and displayed at checkout
Some products entail special delivery costs (e.g. Hazardous goods)
We are an EASA part 145 approved organisation. Our policy is to sell only high quality products which offer good value for money. If you are not completely satisfied with your purchase please return the goods in original condition and packaging within 28 days of purchase for replacement, exchange, or a full no quibble refund.