Is Garmin inReach messaging free?

Messages to the Garmin International Emergency Response Coordination Center (IERCC), during an SOS are not charged. For messages to anyone other than the IERCC during an SOS, standard messaging charges will be applied. You will need an inReach plan for other messages. The number of included messages depends on the level of service you signed up for: Safety Plan: 10 messages Recreation Plan: 40 Messages Expedition and Extreme2 Plans: unlimited messages (overage charges do not apply)

Read more...

What aircraft lights are required?

In addition to the red, green, and white position lights (red to port, green to starboard, and white astern), regulations require one anti-collision light for aircraft flying at night. This can be either white or red, and may be either a mechanically rotating beacon or a flashing strobe.

Read more...

Is an aircraft equipment list required?

FAA guidance: The aircraft equipment list is originally issued by the aircraft manufacturer and is required to be maintained by the Type Certificate Data Sheet (TCDS). An aircraft and its installed components and parts must continually meet the requirements of the original Type Certificate or approved altered conditions. The aircraft equipment list is normally submitted in the form of a multiple page document for transport type aircraft. An air carrier operating under an approved weight and balance program may not be required to maintain an equipment list...

Read more...

What is Garmin D2?

The D2 is a pilot watch designed to be as sophisticated in style as it is in function. It's the first pilot watch to help you in-flight, boasting a high-sensitivity WAAS GPS receiver, altimeter with adjustable baro setting, and 3-axis compass.

Read more...

How do I update SkyEcho 2?

Update SkyEcho 2 Transceiver Software Before you begin Download the latest transceiver software for SkyEcho 2 SkyEcho 2 Transceiver v.2.6.13 2.6.13 Released 12/30/2020 Set default SDA to 1 2.6.9 Released 12/16/2019 Boost serial connection to GPS receiver. Connect to the SkyEcho 2 Prior to beginning the process download the latest firmware from the link above. To connect to the SkyEcho 2, power on SkyEcho 2 and join a device to the wireless network SSID named SKYECHO-XXXX using the procedure for your device. This procedure is identical to joining...

Read more...