BendixKing AeroVue Touch EFIS (Certified)

The AeroVue Touch is an advanced flight display with all the features and functions the modern
pilot demands.

Value to the Owner
AeroVue Touch is a fast, powerful and easy-to-use flight display for your certified aircraft. It can be installed as a primary flight display in a new certified aircraft or to modernise the "six pack" of primary flight instruments in an existing aircraft. The 10.1" display provides near 4K resolution - the highest in the industry. The display can be used as full screen primary flight display or a split screen primary and multifunction display.
The high performance AeroVue Touch supplants all previous generations of flight displays for certified aircraft at a highly competitive price point. It comes standard with all flight indicators, the industry-leading SmartView™ synthetic vision, ADS-B In weather and traffic and a vertical situation display that shows flight path over terrain.

Benefits
The Bendix/King AeroVue Touch offers the best value with the following benefits:
• All essential flight information on one screen
• Intuitive menu structure - flight-critical functions accessible with only one or two touches
• Vibrant touchscreen provides near 4K resolution - the highest resolution on the market
• Anti-glare, anti-smudge, and anti-scratch touchscreen
• Multiple navigators integrated - BendixKing AeroNav & KSN, Avidyne IFD, and Garmin GTN/GNS
• Ease of access to on-screen inputs in turbulence by utilizing the ergonomic grip and hand anchor points around the display
• Combines processor and display into one unit - minimizes installation complexity by reducing the component count and eliminating wiring harnesses
• No cooling fan and no moving parts
• Separate 4-knob input controller installs horizontally or vertically
• Databases uploads and installer-performed software updates via USB
• Future software upgrades included
• The multi-function display offers the following:
  o Chart data (subscription required)
    ▪ VFR sectionals
    ▪ IFR high/low
    ▪ Terminal Area Charts and Airport Diagrams
  o Moving map
    ▪ Base map
    ▪ Terrain awareness
  o ADS-B weather and traffic display
  o Airport information on touch
    ▪ Frequencies
    ▪ Runway information
  o Vertical situation display

System Conponents
AeroVue Flight Display
AeroVue Control Panel
KMG 7010 Magnetometer
KG 71 ADAHRS
KTP 73 Outside Air Temperature (OAT) Probe

PRIMARY FLIGHT DISPLAY
Length x Width x Height: 6.897 x 10.45 x 4.08 in. (175.18 x 265.43 x 103.63 mm)
Weight: 7.59 lbs. (3.44 kg)
Operating Voltage: 9.0 to 30.3 VDC
Current Draw - Typical: 1.33 AMP for 28 VDC | 2.66 AMP for 14 VDC
Circuit Breaker: 2 AMP for 28 VDC, 3 AMP for 14 VDC
Cooling Requirements: Convection cooled (no fan)
Connectors: One female 78-pin and one male 78-pin
Viewing angle envelope: 80° from all directions

CONTROL PANEL
Length x Width x Height: 1.48 x 6.25 x 3.67 in. (37.6 x 158.8 x 93.2 mm)
Weight: 1.05 lbs. (0.47 kg)
Operating Voltage: provided by flight display
Circuit Breaker: one, uses circuit breaker for flight display
Cooling Requirements: Convection cooled (no fan)
Connectors: male 9-pin D-sub
Mounting: Front Mount

MAGNETOMETER
Length x Width x Height: 3.70 x 5.83 x 1.33 in. (93.98 x 148.08 x 37.78 mm)
Weight: 0.90 lbs. (0.41 kg)
Operating Voltage: 9.0 to 30.3 VDC
Current Draw (at 27.5 VDC):
• 80 mA Nominal, 25° C, after a 2-minute warmup
• 200 mA Nominal, -55° C, after a 2-minute warmup
• 700 mA Maximum, -55° C
Circuit Breaker: 1 AMP for 28 VDC, 2 AMP for 14 VDC
Cooling Requirements: Convection cooled (no fan)
Connectors: Female 9-pin
Temperature: -55 ° C to +70° C
Signal inputs/outputs: Serial CAN bus
Altitude: 55,000 ft.

Air Data Attitude Heading Reference System (ADAHRS)
Length x Width x Height: 8.65 x 5.1 x 1.4 in. (219.72 x 129.43 x 35.56 mm)
Weight: 2.17 lbs. (0.98 kg)
Operating Voltage: 9.0 to 30.3 VDC
Current Draw - Typical: 0.2 AMP for 28 VDC | 0.4 AMP for 14 VDC
Circuit Breaker: 2 AMP for 28 VDC, 3 AMP for 14 VDC
Cooling Requirements: Convection cooled (no fan)
Connectors: male 50-pin and female 9-pin (maintenance port)

Outside Air Temperature Probe (OAT)
Length x Width x Height: 1.65 x 1.75 x 1.00 in. (41.91 x 44.45 x 25.4 mm)
Weight: 0.15 lbs. (0.07 kg)
Operating Voltage: none, connected to ADAHRS, no interface to aircraft power
Current Draw - Typical: none, no interface to aircraft power
Circuit Breaker: none
Cooling Requirements: no cooling required
Connectors: 5 ft. 3-conductor shielded wire lead, spliced into wiring harness

Package includes
89000020-001-0000: Primary Flight Display
89000020-002: Install Kit
89000020-007: Grip/Hardware
89000020-003: Install Kit - Config Module
89000026-001-0000: KCP 100 Control Panel * horizontal version available *
89000026-004: KCP 100 Install Kit
065-00189-0101: KMG 7010 Magnetometer
050-03643-0000: KMG 7010 Install Kit
89000023-001-0000: KG 71 ADAHRS
89000023-007: KG 71 Install Kit
89000025-001-0000: KTP 73 Outside Temp Probe
D201707000026: Pilot Guide

Required but not supplied
WAAS Certified GPS/NAV/COM
Audio Panel/Intercom